Clearaudio MASTER REFERENCE User Manual download pdf (Page 24)

Master Reference

Bedienungsanleitung / USER MANUAL

Seite/Page 24 © clearaudio electronic GmbH 2007

Unpack the turntable platter with the upper part of the platter bearing. Remove the

protective security tape from the bearing housing and place this unit carefully over the

spindle mounted in the turntable chassis. Do not use too much pressure for this step

otherwise you will cause damage to the bearing. Caution: pay attention not to place any of

the grease on the acrylic surface of the chassis.

Place the pulley on the motor spindle. The distance between the pulley and the motor

housing should be approx. 1 mm. Tighten the three little screws inside the pulley with the

aluminium screwdriver provided.

1mm

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30 31

No comments

Clearaudio MASTER REFERENCE User Manual Page 24